WIKA TR33 Manual De Instrucciones página 32

12. Specifications
Operating conditions
Conditions for outdoor use (only
applies to UL approval)
EN
Ingress protection (IP code)
Case with connected connector
Coupler connector, not connected
Weight
1) Dependent on the instrument version
2) Reduced operating pressure when using a compression fitting:
Stainless steel = max. 100 bar [1,450 psi] / PTFE = max. 8 bar [116 psi]
3) Not tested with UL
For further specifications see WIKA data sheet TE 60.33 and the order
documentation.
32
The instrument is suitable for
■
applications with pollution degree 3.
The power supply must be suitable
■
for operation above 2,000 m
should the temperature transmitter
be used at this altitude.
The instrument shall be installed
■
in locations sheltered from the
weather.
The instrument shall be installed
■
sun/UV irradiation protected.
IP67 per IEC/EN 60529
3)
■
IP69 per IEC/EN 60529
■
IP69K per ISO 20653
■
The stated ingress protection only
applies when plugged in using line
connectors that have the appropriate
ingress protection.
IP67 per IEC/EN 60529
approx. 0.2 ... 0.7 kg [0.44 ... 1.54 lbs] -
depending on version
WIKA operating instructions model TR33