Refrigerator Installation; Unpacking The Refrigerator - KENMORE ELITE 795.5185 Manual De Uso

WARNING
Excessive Weight Hazard:
Use two or more people to move and install the
refrigerator. Failure to do so can result in back or
other injury.

UNPACKING THE REFRIGERATOR

Remove tape and any temporary labels from the
refrigerator before using. Do not remove any labels,
the model and serial number label, or the Tech Sheet
that is located under the front of the refrigerator,
behind the base grille.
To remove any remaining tape or glue, rub the area
briskly with your thumb. Tape or glue residue can also be
easily removed by rubbing a small amount of liquid dish
water and dry.
uids, or abrasive cleaners to remove tape or glue. These
products can damage the surface of the refrigerator.
Refrigerator shelves are installed in the shipping position.
Please reinstall shelves according to your individual
storage needs.
NOTE:
This appliance is intended to be used in household and
similar applications such as:
environments
• farm houses and by clients in hotels, motels and other
residential environments
• bed and breakfast environments
• catering and similar non-retail applications.
This product is not to be used for special purposes such
as the storage of medicine or test materials, or for use
on ships, etc.

REFRIGERATOR INSTALLATION

ngers. Wipe with warm
ammable
ces and other working
Excessive Weight Hazard:
The refrigerator is heavy. When moving the refrigerator
for cleaning or service, be sure to protect the floor.
Always pull the refrigerator straight out when moving it.
Do not wiggle or walk the refrigerator when trying to
oor damage could occur.
Explosion Hazard:
ammable materials and vapors, such as
gasoline, away from the refrigerator. Failure to do so
re, explosion, or death.
9
WARNING
WARNING