Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
trOUbleshOOtInG
when performing
measurements within a
short period of time, the
results vary greatly.
The battery symbol (l)
lights up on the
display (b).
The thermometer does not
carry out measurements,
but it can be switched on.
WARRANTY & SERVICING
This product was produced with the utmost care and was thoroughly tested before it left the
factory. Therefore, we provide a warranty period of 24 months from the date of purchase for
this product. Promed products conform to their description and the relevant specifications; it is
your responsibility to ensure that the product which you have purchased is designed for your
intended use.
•
In the event of material defects and/or manufacturing errors which appear during proper
use and are detected during the warranty period, we will replace all defective parts of the
product free of charge within the warranty period, including the labour costs for warranty
repairs.
•
The warranty does not cover:
•
Normal wear on the product
•
Defects which were caused during transportation or storage of the product
•
Defects or damage which were caused through improper use or inadequate maintenance
•
Damage resulting from disregarding the notes in the operating manual
•
Damage resulting from modifications to the product which were not carried out by Promed.
•
Damage caused by sharp objects or as a result of torsion, compression, being dropped, an
abnormal impact or other actions which are beyond Promed's reasonable control.
•
Parts which are subject to wear (e.g. moving parts such as ball bearings, etc., fasteners,
etc.) are generally excluded from the warranty.
•
A claim under the warranty is not enforceable if:
•
the product is not sent back in its original packaging or in adequately secure packaging;
•
it has been modified or repaired by a person or company other than Promed or one of
Promed's authorised dealers;
•
the product has been repaired using parts which are not approved by Promed;
•
the product's serial number has been removed, erased, modified or made unreadable;
•
For reasons of hygiene, any products which have been exposed to direct contact with
a body or with bodily fluids (e.g. blood) must be packaged in an additional plastic bag
before they are sent back. In this case, a specific note of this situation must be made in the
package or in the accompanying documents.
•
For components or products which are replaced during the warranty period, a warranty is
only provided for the remainder of the original warranty period; provided that the product
or part replacement was carried out by Promed or one of Promed's authorised dealers.
The measurement was not
carried out correctly or without
complying with the required
intervals.
The battery is dead.
The battery is dead.
The measuring sensor (a) may
be dirty.
21
Repeat the measurement correctly.
Replace the battery.
Replace the battery.
clean the measuring sensor (a)
according to the instructions
above.
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI
Publicidad
Capítulos
Tabla de contenido
