Initial Setting Of The Timer; Memorizing Planotime In The Automation Receivers; Selecting "Manual" Mode And Choosing A Group - Nice planotime Instrucciones Y Advertencias Para El Instalador

2.2) Initial setting of the timer

To set the timer, follow the steps in table No. 1. If you wish to set the timer, press key " "; in this case the timer will
start running from 00.00 on Sunday.
Table 1 setting the timer
1. Press key
2. Press key
3. Press key
4. Press key
5. Press key
(Su=Sunday; Mo=Monday; Tu=Tuesday; We=Wednesday; Th=Thursday; Fr=Friday; Sa=Saturday)
6. Press key
7. Press key
8. Press key
9. Press key
(01=January; 02=February....12= December)
10. Press key
11. Press key
(from 2000 to 2059)
12. Press key
Only the timer must be re-set when the battery is replaced; all the events and parameters remain constantly memo-
rized in PLANOTIME.

2.3) Memorizing PLANOTIME in the automation receivers

Every radio transmitter, including PLANOTIME, is recognized by the receivers of the automations through a "code"
which is different from any other transmitter code. A "memorization" process is therefore needed to enable the
automation to recognize PLANOTIME's code. If a group consists of multiple automations, the memorization opera-
tion must be repeated for each of them. Since PLANOTIME is capable of controlling up to 6 groups of automations,
it will transmit a different code for each of them. Therefore, before you start the memorization procedure you need to
select the group to which the automation is to be assigned.
The memorization procedure must be carried out with PLANOTIME set to "manual" mode, by selecting a single
group at a time. To select the "manual" mode and choose a group follow the steps described in the table:
Table 2

Selecting "manual" mode and choosing a group

1. Press key
2. Press key
3. Press key
4. Starting from the first group, press key
select another group
5. Now you can use keys
Table 3 Sending a command to the same group
1. Press one of the following keys
Table 4 Selecting another group
1. After transmitting, press key
after connecting the battery
or to set the time
to confirm the time
or to set the minutes
to confirm the minutes
or to select the day of the week
to confirm the day
or to select the day of the month "
to confirm the day
or to select the number of the month "
to confirm the month
or to select the year
to confirm the year
repeatedly a number of times until Auto starts flashing
to select "manual" mode Man
to confirm the mode
to send the commands to the selected grou
a number of times to select the desired group
"
"
a number of times if you need to
G
Example
or
or
or
or
or
or
Example
... Auto
Example
Example
5