Publicidad
Idiomas disponibles
Idiomas disponibles
3 – SAFETY INSTRUCTIONS
OPERATIONS SHOULD ONLY BE CARRIED OUT WHEN THE
DISCONNECT THE BATTERY AND/OR ANY EXTERNAL ELECTRICAL
Read the manufacturer's identification plate carefully. The values for voltage, power,
-
current and frequency are shown. Check that these values match the supply use.
Never touch accidentally stripped cables or disconnected connectors.
-
-
Never handle a generating set with wet hands or feet.
-
Maintain the electrical cables and the connections in good condition (risk of electrocution
or damage to the equipment).
The electrical connections must be made in accordance with current standards and
-
regulations in the country of use.
Do not use faulty, poorly insulated or provisionally connected wires.
-
Never invert the positive and negative battery terminals when connecting them. This could
-
cause severe damage to the electrical equipment. Follow the wiring diagram supplied by
the manufacturer.
Protection against electric shocks is ensured by an assembly of specific equipment. If this
-
needs to be replaced, only components with identical nominal values and specifications
should be used
This document is the property of SDMO INDUSTRIES. Any communication, reproduction or publication, in full or in part, is forbidden without written
CALL US TODAY
1-888-POWER-58
DANGER
INSTALLATION OR EQUIPMENT IS SWITCHED OFF
POWER SUPPLY SOURCE.
parts@genpowerusa.com
2/5
REQUEST A QUOTE
authorization from the owner
www.genpowerusa.com
SHOP ONLINE
Publicidad
