MoJack XT Instrucciones Para Asamblea Y De La Operación página 7

Operating Instructions
STEP 3
Installing Lift Arm Inserts
• Slide Lift Arm Inserts into both sides of the
Lift Arm and secure with Push Pins.
STEP 4
Installing Wheel Pads
• Slide Wheel Pads onto Lift Arm Inserts and
temporarily secure with Push Pins.
STEP 5
Familiarize Yourself with the MoJack XT
• Practice raising and lowering the Lift Arm before attempting to
lift the mower (see Steps 12 – 16 on how to raise and lower
the Lift Arm).
• Practice Step 21 if you intend to raise or lower the mower with
a drill attachment.
MoJack XT Lift
Lift Arm
Push Pin
Push Pin
Lift Arm Insert
Push Pin
Lift Arm Insert
Wheel Pad
12
STEP 6
Aligning Wheel Pads to Fit Mower
• Place the front tires of mower 6" in front of the Wheel Pads.
• Remove Push Pins and align the Wheel Pads so that the front
mower tires will be centered on the Wheel Pads.
• Replace the Push Pins to lock the Wheel Pads to the Lift Arm.
Wheel Pads must be equal distance from the Lift Arm to
maintain proper balance.
Lift Arm Insert
STEP 7
Adjusting Support Rods for Proper Tire Size
• Adjust Support Rods on Wheel Pads to accommodate the
front tire size of the mower. Please refer to the chart below
for proper Support Rod placement based on the diameter
of the mower's front tires.
• Secure Support Rods to Wheel Pads with Large Hair Pins.
SUPPORT ROD GUIDE FOR TIRE SIZES
10" - 11.5"
(25cm - 29cm)
12" - 15"
(30cm - 38cm)
15.5" - 17"
(39cm - 44cm)
See page 20 for more more detailed guide.
STEP 8
Reverse Front Tires of Mower
• In some cases, the mower deck or anti-scalping wheels will hit the
Lift Arm while the mower is being raised. This is often the case if
part of the deck (including the anti-scalping wheels) protrudes past
the center line of the front wheels of the mower.
• Rotate the front tires 180° so that they are in the reverse position.
• Remove the Support Rods from the Wheel Pads and slide the
MoJack XT underneath the mower.
• Secure the Support Rods to Wheel Pads with Large Hair Pins.
MoJack XT Lift
Operating Instructions
Large Hair Pin
Support Rod
(optional – if not applicable, skip to Step 9)
Forward
Wheel
Position
Reverse
Wheel
Position
13