PREPARATION AND GRILL SET-UP
Before First Use
1. Remove grill from carton and discard all the packaging. Make sure there are no loose
parts.
Note: Before using your grill, read the instructions and your manual.
2. Remove and save literature.
3. Please go to www.prodprotect.com/applica to register your warranty.
Follow instructions for each step in the order they are listed as you look at the diagrams.
This will allow for easier assembly.
If you have any questions or require assistance, contact Consumer Support at the
toll-free number listed on the cover of this manual. Be sure to have your model number
available; it is printed on the cover of this manual and viewable through the opening on
the underside of the grill.
STEP 1. Place the grill on a flat table top or level surface where you will be using it. Make
sure the rotating front handle is locked in the vertical position.
Before rotating
front handle
Fig. 1
STEP 2. Grasp the spring loaded level adjusters on the right and left sides of the grill. Pull
out and rotate away from you and toward the back of the grill. This will unlock the lid.
Continue rotating until you feel the adjusters lock into place.
Grasp and pull
both spring loaded
adjusters out
Fig. 3
STEP 3. Open the lid. Swing the right and left side flaps out and insert the hooks into the
small slots in the front corners of the grill.
Open lid
Fig. 5
After rotating
front handle
Fig. 2
Rotate
counterclockwise
Fig. 4
Secure
side
flaps
Fig. 6
9