Dash Disassembly - Metra 99-3011S Instrucciones De Instalación

1. Using a panel removal tool, gently
pry the upper trim/vent housing
panel from the dash. Remove the
factory clip from back of trim/vent
housing panel and install in same
location on radio trim panel of
99-3011S. (Figure A)
2. Using a panel removal tool, gently
pry the shifter surround panel.
On manual transmission vehicles,
unclip and reposition the shifter
boot. Disconnect indicator plug.
(Figure B)
3. Remove (2) 9/32" screws from the
storage pocket. Remove storage
pocket. (Figure C)

Dash Disassembly

(Figure A)
(Figure B)
(Figure C)
99-3011S
4. Remove (4) 9/32" screws from the
accessory control panel. Gently pry
the edges of the panel to release
the clips. Disconnect the accessory
control panel plugs. (Figure D)
5. Remove (2) 9/32" screws from the
radio control panel. Disconnect the
radio control panel. (Figure E)
6. Remove (4) 9/32" screws from the
radio chassis. Disconnect the radio
chassis. (Figure F)
Continue to kit assembly
2
(Figure D)
(Figure E)
(Figure F)