Kit Assembly - Metra 99-3011S Instrucciones De Instalación

ISO DIN head unit provisions
with pocket
1. Attach radio mounting brackets
to DIN pocket using (4) supplied
Phillips screws. (Figure A)
2. Attach radio mounting brackets to
ISO holes in radio chassis using
the screws supplied with the radio.
(Figure A)
3. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
4. Remove factory vents and snap
into radio trim panel. (Figure B)
5. Reassemble dash in reverse order
of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-3011S
Double DIN head unit provisions
1. Attach radio mounting brackets
to ISO holes in double DIN radio
chassis using the screws supplied
with the radio. (Figure A)
2. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Re-connect
the negative battery terminal and
test the unit for proper operation.
3. Remove factory vents and snap
into radio trim panel. (Figure B )
4. Reassemble dash in reverse order
of disassembly.
3
(Figure A)
(Figure B)