Metra 99-9605B Instrucciones De Instalación página 3

Lower dash:
6. Unsnap the trim panels from the sides of
the lower console. (Figure F)
Note: Unclip from the front of the
vehicle, and then pull back.
7. Unsnap and remove the factory
CD tray/pocket. (Figure G)
DASH DISASSEMBLY
(Figure F)
(Figure G)
(CONT.)
For models equipped with a DSP controller:
8. The controller will need to be relocated
to the inside of the lower dash. The
controller must stay connected in order
for the factory amplifier to function.
9. Unclip and remove the DSP trim panel.
(Figure H)
10. Remove (2) T-20 Torx screws to remove
the DSP controller. (Figure I)
Continue to Kit Preparation
(Figure H)
(Figure I)
REV. 4/11/2018 INST99-9605B
3