Dash Disassembly - Metra 99-9605B Instrucciones De Instalación

For models without factory navigation:
Upper dash:
1. Insert the radio removal keys into the
radio until they click in, and then remove
the radio. (Figure A)
Note: The curved portion of the radio
removal keys should point towards the
middle of the radio.
2. Using a panel removal tool, remove the
HVAC trim panel. (Figure B)
3. Remove (2) Phillips screws on each side
of the HVAC controls, unplug and then
remove. (Figure C)
2

DASH DISASSEMBLY

(Figure A)
(Figure B)
(Figure C)
4. Unsnap and remove the switch panels
from each side of the radio opening.
(Figure D)
5. Remove (6) Torx T-20 screws securing
the radio frame assembly. (Figure E)
Note: The (2) middle screws are located
deep in the dash on the sides of the
radio opening.
Continued on the next page
(Figure D)
(Figure E)
|
1.800.221.0932 MetraOnline.com