Kit Assembly; Iso Din Radio Provision With Pocket - Metra 99-9605B Instrucciones De Instalación

ISO DIN radio provision with pocket

(NAV models only)
1. Secure the pocket to the radio housing
using the (4) 8 x 3/8" Phillips screws
provided. (Figure A)
2. Remove the metal DIN sleeve and trim
ring from the aftermarket radio.
3. Slide the radio into the housing/pocket
assembly and then secure it using the
screws supplied with the radio.
(Figure B)
4. Slide the radio housing into the radio
frame assembly removed in dash
dissassembly. (Figure C)
6

KIT ASSEMBLY

(Figure A)
(Figure B)
5. Locate the factory wiring harness and
antenna connector in the dash and
complete all necessary connections to
the radio. Metra recommends using the
proper mating adapter from Metra and/
or AXXESS. Test the radio for
proper operation.
6. Place the radio brackets around the
radio housing and frame assembly and
then secure it using the (2) 8 x 3/8"
Phillips screws provided. (Figure D)
7. Reassemble the dash in reverse order of
disassembly.
(Figure C)
(Figure D)
|
1.800.221.0932 MetraOnline.com