SANUS VuePoint F11c Manual De Instrucciones página 10

STEP 2A Attach Wall Plate - Wood Stud
CAUTION:
Avoid potential personal injuries and property damage!
●
Drywall covering the wall must not exceed 5/8 in. (16 mm)
●
Minimum wood stud size: common 2 x 4 in. (51 x 102 mm) nominal 1½ x 3½ in. (38 x 89 mm)
1. Locate your stud. Verify and mark the center of the stud by finding the stud edges using an awl, a thin nail, or an edge to edge stud finder.
2. Position the wall plate template
3. Drill pilot holes using a 1/8 in. (3 mm) diameter drill bit. Remove wall plate template
IMPORTANT: Be sure to drill into the center of the stud.
IMPORTANT: Pilot holes must be drilled to a depth of 2½ in. (63.5 mm).
1
≤ 5/8 in.
(16 mm)
10
14
at your desired height and line up the holes with your stud center line. Level the template and tape in place.
2
14
.
3
14
2½ in.
(63.5 mm)
1/8 in.
(3 mm)
14