1
With the sliding doors fully open, install the door seal on the edge of the stationary panel, as indicated on the figure. Cut it as
required.
NOTE: The door seal lip must face inside the cabin, as indicated. Repeat the procedure for the other stationary panel.
1
To ensure tightness of the shower door, apply a high-quality silicone caulk, as indicated.
Let the caulk cure for 24 hours before using the shower.
Note: Apply silicone caulk to the locations outside the shower cabin.
7 - INSTALLATION OF SEALS
7 -
8 - SILICONE APPLICATION
8 -
10
x2