MAAX 137240 Guia De Instalacion página 7

Lift the frame and maneuver it so that a panel post engages
1
into the wall profile, as indicated on the figure.
3
Insert a glass panel in the glass profile of the FRAME, as
indicated on the figure.
The glass panel then rests on a rail shelf.
3 - STRUCTURE AND FIXED PANEL INSTALLATION 3 -
x2
Panel post
groove
View from inside
of shower cabin
Then, rotate [the shelf] until the other panel post engages
2
into the other wall profile, as indicated on the figure. Center
the frame over the base threshold.
3
Lightly tighten the top and bottom
screw to hold the structure in place
4
Secure the glass panel in position using ''A'' and ''B'' glass clips
and # 7 x 7/16'' screws, as indicated on the figure.
Repeat the procedure for the glass panel on the other side.
7
View from inside of
shower cabin
x2
View from inside
of shower cabin