Bluetooth ® Connection; Viewing Sessions - Tru-Test SRS2 Guia De Inicio Rapido

Bluetooth
5
The stick reader will automatically connect to any Tru-Test
with which it has previously been paired (when in BT Auto mode - default).
In order to manually establish a
are having trouble establishing a
1. With both devices off, position the stick reader close to the other device.
2. Switch on the device and, if necessary, check that its
3. Switch on the stick reader.
4. Select Settings, then Bluetooth to display the Bluetooth Settings screen.
5. Select Search for devices.
6. Select a device.
7. Use the stick reader to scan an EID tag in order to test the connection.
Note:

Viewing sessions

6
You can view information collected during a session in the Sessions screen.
1. If necessary, press
2. Select Sessions.
A list of sessions is displayed.
3. Select a session to view:
4
® connection
Bluetooth wireless connection (if you are using a non-Tru-Test weigh scale indicator, or you
Bluetooth
wireless connection):
A list of available devices will be displayed.
Wait for up to one minute until the two devices are paired. When pairing is complete, the
indicator light above the Read/Select button will illuminate blue.
Always turn on the device you are trying to pair with first, BEFORE the stick reader.
to go to the Home screen.
Bluetooth
enabled weigh scale indicator, or any other device,
Bluetooth
setting is enabled.
Bluetooth