Modifying Settings; Settings Menu - Tru-Test SRS2 Guia De Inicio Rapido

Modifying settings

8
When shipped, the stick reader is set up to simply scan EID tags. You can change the way that the stick reader is set up to
suit the task that you are about to perform.

Settings menu

To modify the settings, from the Home screen, select Settings.
General
Change the Date/Time, Language, Auto Off, Vibration and Buzzer settings. View the stick reader Firmware details.
Bluetooth
Bluetooth Bluetooth
Auto* - Automatically connect to the ® enabled device most recently used or to a Tru-Test enabled
weigh scale indicator.
Bluetooth
Off - Turn off wireless connectivity
Bluetooth Bluetooth
Manual - Manually search for a enabled device and accept incoming connections.
Bluetooth
Search for Devices – Manually search for a enabled device within range (see row above).
Paired Devices - Display previously connected (paired) devices.
Tag Reading
Read Mode
Standard* - Press the Read button to scan a tag. Hold down the Read button to continuously scan tags.
Continuous - Press the Read button to continuously scan tags. Scanning will only stop when the Read button is pressed again.
Single – Press the Read button to scan a single tag. Even if you hold down the Read button, another tag will not be scanned.
Tag Format
Decimal* (e.g. 985 155000012939), Decimal2 (e.g. 985155000012939), Hex (e.g. 8000F66416B8808B) or ISO (e.g
1000000985155000012939).
Allow Duplicates
Set Allow Duplicates to No*, to ensure that an EID is not recorded twice in the same session. The stick reader remembers the
previous 500 tags.
Default settings marked *
6