PEERLESS Mounts PRG-UNV Instalación Y Ensamblaje página 8

Installation to Threaded Rod
(Not evaluated by UL - Professional installation only)
Thread two 1/4-20 hex thin nylon-insert locknuts (not included) on two 1/4-20 threaded rods (not
4
included) to the desired height of projector mount assembly. Attach projector mount assembly
(A) to the two 1/4-20 threaded rods using two 1/4-20 hex thin nylon-insert locknuts as shown in
figure 4.1 or figure 4.2.
1/4-20 THREADED
ROD (NOT
INCLUDED)
1/4-20 HEx THIN
NyLON-INSERT
LOCkNUT (NOT
INCLUDED)
fig. 4.1
ARROW
INDICATES
FRONT OF
MOUNT
A
1/4-20 HEx THIN
NyLON-INSERT
LOCkNUT (NOT
INCLUDED)
fig. 4.2
8 of 51
1/4-20
THREADED
ROD (NOT
INCLUDED)
1/4-20 HEx
THIN NyLON-
INSERT
LOCkNUT
(NOT
INCLUDED)
ARROW
INDICATES
FRONT OF
MOUNT
A
1/4-20 HEx
THIN NyLON-
INSERT
LOCkNUT (NOT
INCLUDED)
ISSUED: 09-30-09 SHEET #: 056-9024-1