RAMSET RA27 Manual De Instrucciones De Funcionamiento Y Seguridad Del Operador página 2

SAFETY INTRODUCTION
THIS TOOL IS TO BE USED ONLY BY PROPERLY TRAINED
YOU MUST SUCCESSFULLY COMPLETE THE
TOOL AND OBTAIN A CERTIFIED OPERATOR'S LICENSE
BEFORE HANDLING, LOADING OR OPERATING THIS TOOL.
ATTEMPTING TO HANDLE OR OPERATE THIS TOOL
WITHOUT PROPER TRAINING AND LICENSING CAN RESULT IN
SERIOUS INJURY TO THE OPERATOR OR BYSTANDERS.
Operator's and bystanders
must wear eye and hearing
protection.
Never close tool with hand over fastener loading end of the tool.
A serious hand injury from penetration by the piston or a
Just as no one can merely read a book about driving an automobile and then
hope to drive one safely, no one should attempt to use any Ramset tool without
adequate, competent personal instruction. And just as one must be licensed to
drive an automobile, one must also be licensed to use a powder actuated tool.
No automobile instruction book or instructor can forewarn a learner against all
possibilities and emergencies, nor can Ramset instructors and printed material
detail all possible conditions surrounding the use of Ramset tools and products.
Responsibility for the safe and proper use of this tool rests with the tool user
and the employer.
SAFETY INTRODUCTION
2
AND LICENSED OPERATORS.
RAMSET'S TRAINING PROGRAM FOR THE
discharged fastener could result.
DANGER
Read manual before
DANGER
DANGER
operating tool.
DANGER