DUCTED INSTALLATION ONLY
1. Press the damper into the duct connector
on the hood. Fig. 13.
2. Run 6-inch diameter metal ductwork to
the outside location.
3. Install an appropriate wall or roof cap with
damper to exhaust the air to the outside.
4. Tape all duct joints with aluminum duct
tape.
5. Plug power cord into wall outlet.
6. Install upper and lower decorative flues
onto the range hood. Fig. 14.
- Vents are concealed on 8-foot
ceilings.
- Vents are exposed on 9-foot
ceilings.
7. Secure upper flue to flue mounting bracket
with (2) 3.9 x 9.5 mm screws. Fig. 15.
6-INCH DIA.
METAL
DUCT
CONCEALED
VENTS
3.9 x 9.5 mm
SCREWS (2)
3.9 x 9.5 mm
- 10 -
DAMPER
DUCT
CONNECTOR
FIG. 13
CEILING
FIG. 14
FIG. 15