Best WM45I Manual De Usuario página 11

NON-DUCTED INSTALLATION ONLY
Note: Purchase Model ANKWM45 Non-
ducted Recirculation Kit.
Do not install discharge collar or the flue
mounting bracket supplied with the range
hood.
1. Use "Non-duct Plenum Mounting
Template".
2. Follow instruction on the template to lacate
and install (2) drywall anchors in the ceiling
or soffit. Fig. 16 & 17.
3. Secure plenum to ceiling or soffit with (2)
4,8x38 mm mounting screws. Fig. 18
4. Snap the 6" diameter duct connector into
place on the plenum. Fig. 19.
5. Attach 6" to 5" reducers to the blower
discharge and the plenum duct connector.
Fig. 19.
6. Connect 5" diameter metal ductwork
between hood and plenum. Fig. 20.
7. Tape all duct joints with aluminum duct
tape.
8. Plug power cord into wall outlet.
CENTER LINE OF COOKTOP
ON CEILING OR SOFFIT
CENTER
LINE OF
COOKTOP
ON WALL
MARK CEILING
OR SOFFIT HERE
- FOR LOCATION
OF DRYWALL
ANCHORS
FIG. 16
DRYWALL
ANCHORS
FIG. 17
PLENUM
6" TO 5"
REDUCER
- 11 -
4.8 x 38 mm
SCREWS
FIG. 18
6" DUCT
CONNECTOR
FIG. 19
FIG. 20