Do Nots - Nitroset NTS8X Manual Del Usuario

DOs and DON'Ts 10

DO NOTs

DO NOT use NITROSET® tools to fasten into brittle materials such as brick, tile,
rock or glazed material.
DO NOT attempt to drive fasteners into soft materials such as wood or drywall
or light gauge metal.
DO NOT attempt to drive fasteners into hardened steel, cast iron, or natural rock
such as marble.
DO NOT drive fasteners into base steel thinner than the shank diameter of the
fastener.
DO NOT fasten into cracked or spalled areas of concrete.
DO NOT drive fasteners closer than 3" to the edge of the concrete materials and
1" to the edge of steel base materials.
DO NOT use NITROSET® tools in a hazardous environment.
DO NOT use the tool prior to ensuring that all parts are in good working order
and securely attached to the tool. All parts should be fully threaded and hand
tight.
DO NOT place hand over the muzzle end to reset the tool.
W W W . N I T R O S E T . C O M