Replacing The Firing Pin - Nitroset NTS8X Manual Del Usuario

Replacing the Firing Pin

When removing the firing pin, depress the trigger ball release, and guide the
pin out.
Keep the trigger ball release depressed until the pin exits the guide, otherwise
the spring will propel the trigger ball away.
1. Use the provided roll pin punch to knock out the 1/8" roll pin.
2. Remove the worn firing pin from the firing pin holder
3. Seat a new 1/8" roll pin into the holder. Do not insert the roll pin completely.
4. Insert a new firing pin into the slot in the firing pin holder. Ensure that the
holes on the back of the firing pin line with the holes in front of the holder.
5. Using a hammer, fully insert the 1/8" roll pin.
6. Reinstall the trigger spring and trigger ball release into the appropriate slot
on the firing pin holder.
7.
While depressing the trigger ball spring, insert the firing assembly into the
firing pin guide.
REMEMBER
Disassembly
Assembly
W W W . N I T R O S E T . C O M
13