Safety Precautions; Basic Instructions; Required Safety & Protective Equipment; Misuse Of The Tool - Nitroset NTS8X Manual Del Usuario

Safety Precautions

Basic Instructions*

You are required to understand and follow all safety instructions for proper and
safe use of NITROSET® tools. If you require any assistance, please contact your
jobsite safety foreman or call Nitroset, LLC. at 1.800.524.4649.
Required Safety & Protective Equipment
Always wear proper safety equipment including safety glasses, hard hats,
hearing protection, and gloves while operating the tool.
CAUTION
Wear safety
glasses

Misuse of the Tool

Manipulation or modification of the tool is not permitted. Any alteration of the
tool or use of non-genuine NITROSET® parts might impair function or cause
damage to the tool. Use of non-genuine parts will void any warranties.
Do not operate in an explosive or inflammable environment.
Never put your hand over the nosepiece of the tool.
Never point the tool at yourself or any bystanders.
Never press the nosepiece against any part of your body or anyone else's body.
Only fasten into appropriate substrates. Use of inappropriate substrates may
cause injuries.
Never attempt to disassemble, modify or alter the fastener assemblies. Use only
the required length and type of pin (with correct adapter) for the application
(Refer to the Adapter Usage Table on Page 6).
Use only genuine NITROSET® Fasteners with the NITROSET® system. Use of
incorrect fasteners may lead to injury or damage to the tool.
*According to ANSI A10.3 and DOT (ref: EX2009040168) NITROSET® tools are not classified as a powder
actuated tool, thus no licensing is required.
CAUTION CAUTION
Wear hard Wear hearing
hats protection
W W W . N I T R O S E T . C O M
CAUTION CAUTION
Wear safety Face shield
gloves
(recommended)
3