HORIZON 75998 Instrucciones De Instalación página 5

1. If equipped, remove integrated rear fascia exhaust outlets – use a 7mm
socket to remove (3) bolts from around each exhaust outlet and then remove.
3. Loosen lower fasica– use 8mm socket to remove (4) lower fascia support fasteners and press down the tabs to detach
bottom plastic panel as shown in Figure 2. NOTE: On Trailhawk models remove (4) extra plastic rivets that secure the heat
shield around lower fascia and take the heat shield down as shown in Figure 3.
©2015-2018 Horizon Global™ Corp - Printed in Mexico
2. Lower exhaust - use 13mm socket to remove (2) bolts that connect exhaust hanger bracket
to the frame (each side). Use exhaust support stand to prevent damaging muffler.
Trailhawk
Sheet 5 of 21
Trailhawk
75998NP 10-10-18 Rev. E