Egin; Parts Checklist; Telephone Jack Requirements; Important Installation Information - GE 29484 Manual Del Usaurio

Introduction
CAUTION: When using telephone equipment, there are basic
safety instructions that should always be followed. Refer to the
IMPORTANT SAFETY INSTRUCTIONS provided with this product
and save them for future reference.
Before You Begin

Parts Checklist

Make sure your package includes the following items:
One 4-wire AC power
line cord adaptor

Telephone Jack Requirements

To properly connect your phone to your telephone lines, you should
identify the type of wall jack(s) you have. You will need an RJ11C (for
a single line) or an RJ14C (for two lines) type modular phone jack,
which might look like the one pictured here, installed in your home.
If you don't have either modular jack, call your local phone company to find out how
to get one installed.

Important Installation Information

• Never install telephone wiring during a lightning storm.
• Never install telephone jacks in wet locations unless the jack is specifically
designed for wet locations.
• Never touch non-insulated telephone wires or terminals, unless the telephone line
has been disconnected at the network interface.
• Use caution when installing or modifying telephone lines.
• Temporarily disconnect any equipment connected to the phone such as faxes,
other phones, or modems.

Desktop/wall
mounting pedestal
Handset Handset
cord
M1 M5
M2 M6
M3 M7
M4 M8
SET LOWER
STORE
1 2 3 CONF
ABC DEF
REDIAL
4 5 6
GHI JKL MNO
LINE 2
7 8 9
PQRS TUV WXYZ
VOLUME
LINE 1
0 #
*
OPER
FLASH HEADSET MUTE HOLD
SPEAKER
Base
Wall plate
Modular
telephone
line jack