Publicidad
All wiring should be done by licensed electricians in accordance with local codes. Improper instal-
lation or use may result in serious injury. Always remove oven from power source before trou-
bleshooting or repairing.
Temperature Setting
Temperature range is 100°F (38°C) to 350°F (177°C). The
Thermostat Dial is calibrated from 100° to 550°F. Required
oven temperature setting is obtained by rotation of Dial to
line up desired temperature with indicator light in the ther-
mostat housing.
The indicator light operates only when voltage is applied to
the heating elements. Momentary rotation past desired tem-
perature setting may be necessary to activate the indicator
light in order to locate it for indexing purposes.
Thermostat is accurate to ± 25°F (14°C) at the sensing bulb,
however, temperature may vary slightly at different areas in
the oven chamber since this is a convection type oven.
**CAUTION**
Warning
Excess Heat: At the maximum setting, the actual tempera-
ture in portions of the oven near the heating elements may
exceed the upper range.
Repair - Spare Parts
Enclosed with these instructions are wiring diagrams and a
repair parts list for your oven. For critical welding operations
requiring continuous holding we would suggest carrying all
of the parts listed in the "Suggested Spare Parts Section" of
these instructions.
N5421000H-5
Publicidad
