Harness - Stihl SG 51 Manual De Instrucciones

Slide the handle into the pump lever
N
and adjust to required length (A, B,
C).
1
A B C
2
Push the pump lever (1) into the
N
shaft (on left or right).
Select required width and secure
N
pump lever (1) to shaft by fitting
retaining pin (2) in one of the
holes (A, B, C).
SG 51, SG 71

Harness

C
A B
1
Adjust the harness straps so that
N
the backplate fits snugly and
securely against your back.
Adjusting Height of Harness Straps
The harness straps can be adjusted to
suit your physique.
2
1
Use a screwdriver to pry the pin (1)
N
out of the backplate.
Remove the pin (1) and pull out the
N
ends of the harness straps (2).
Fit the ends of the harness
N
straps (2) in the lower position.
Insert pin (1) and engage it in the
N
backplate.
Adjusting the Harness Straps
The SG 71 is equipped with a waist/hip
belt.
English
2
1
9