Publicidad
Idiomas disponibles
Idiomas disponibles
Charging the headset
The BTH-068 comes with a built in Lithium Polymer battery. To charge
the unit:
a.Plug the travel charger into an electrical outlet.
b.Plug the Travel Charger into the Power Interface Adapter on the Head-
set.
c.While charging, the LED Indicator Light will turn red. When charging is
complete, the red Indicator tight will shut off or flash red to alert you that
the unit is fully charged and ready to use.
NOTE:
• For first time use ,make sure to fully charge the Headset at least 4
HOURS, preferably ovemight (8-10 hours).
• If the headset has not be en used for more than 21 days, when recharg-
ing it please charge the unit at least 4 hours, preferably ovemight (8-10
hours) as the batterywill need a full charge and be aware the LED Indica-
tor Light may take severa] hours to show recharging is complete.
• While charging the unit, please do not use the Headset.
• Picase use the original charger included with the Headset to charge/
recharge the unit.
• When the LED Indicator Light flashes red during usage or while on stand
by, the battcry is low and you should recbarge the unit as soon as pos-
sible.
• Please recharge the Headset in room temperatures of no less than +14"
F(-IO"C)to + 113" F (+45"C).
Power On/Off
a. To turn the unit on, press and hold the Function button for 5 seconds.
The power will turn on after the LED Indicator Light flashes blue light 3
times.
b. To turn the unit off, press and hold the Function button for 5 seconds
until the red indicator light flashes 3times.
NOTE:
english
11
Publicidad
