Troubleshooting
a. If the headset LED Indicator Light is flashing red-the battery is low and
you must recharge the unit immediately.
b. If, after recharging for 20 minutes, the Headset does not turn on: For
initial use, the power will be on after charging the Headset at least 40
minutes. The manufacturer's recommended initial charging time is no
less than 4 hours, preferably ovemight (8-10hours).
c. If the Headset does not show the recharging sign: The battery is com-
pletely depleted or the headset has not been used for 21 days, when
charging the red lndicator Lightwitl be lit after a few minutes.
d. You hear no sound coming from the Headset:
*Make sure the Headset is tuned on.
*Make sure the headset has been paired with a Bluetooth enabled de-
vice.
*Make sure the distance between the Headset and the paired Bluetooth
device is no more than 30 feet.
* Some Bluetooth mobile phones support only one Headset. In this case,
if you pair the Bth-068 Headset with the device, the other Bluetooth
Headsets may be deactivated. Likewise, ifyou pair other Bluetooth head-
sets with this type of mobile device, the BTH -068 Headset may become
deactivated.
Headset storage
Use of accessories other than the manufacturer's originally supplied
accessories may cause the headset to malfunction or fail. In addition,
product damage, electrical conflicts with non-manufacturer chargers
may occur resulting in the cancellation of the product warranty.
Do not disassemble the headset for any reason. This may damage the
headset accidentally and void the manufacturer's warranty.
Please store the Headset away from dust, heat and areas where it might
accidentally fall or otber damage may occur. Use a clean, soft static-free
cloth to clean the Headset's surfaces.
You can put the Headset in a pocket while not in use. Do not let children
play with the Headset as it may cause damage to the unit and avoid any
danger to young chitdren. Avoid storing the Headset and chargers in
extreme temperatures.
Travel charger
l. The Travel Charger is designed for indoor use and not to be used out-
doors.
2.Connect the Travel Charger with the appropriate power supply.
3 .Do not unplug the Travel Charger from the electrical outlet by the cord.
Use the wall plug to pull the charger from the electrical outlet.
16
english