Publicidad
Idiomas disponibles
Idiomas disponibles
• While turning the Headset on, you will hear a "Du Du" sound from the
receiver. The blue Indicator Light will flash 5 times, then 2 times, and
after repeating this for 5 cycles, the Indicator Light will flash the blue light
every 3 seconds until the unit enters Standby mode.
• While the Headset is turned on, it will automatically search for the
paired device. Under the "ON" mode and within the effective range of
30 feet from the Headset, the Indicator will flash the blue light to indicate
that it entered the connecting mode.
• When turning the headset off, you will hear one "Bi" sound followed
by two "Du" sounds, then the Indicator will shut off after the red light
flashes a few times.
Pairing
First of all, please make sure your phones are Bluetooth enabled and
pair them with the Bluetooth headset following indications of the phones.
When pairing, please place the phone and headset together (the dis-
tance should be less than one meter) to guarantee pairing smoothly.
Paring with 1 phone
a.Tum on both the headset and the phone;
b.Hold the headset's MFB for 8 seconds till its blue and red indicator
lights flash altenately, which means the headset has entered pairing
mode;
c.Activate the Bluetooth function of the cell-phone to get into its search-
ing mode and search for Bluetooth devices ( please refer to the phone's
manual for more instruction).
d.Select "BTH-068" amon~Dhe Q} on the phone's searched devices
Iist , and then confirm according to its indications.
e. Input pin code "0000" to confirm and finish pairing. When the head-
set's blue indicator light flashes, it means the headset and mobile phone
has completed pairing and connected.
Paring with 2 phones
Bluetooth headset BTH-068 has a dual-link function so that two phones
can be connected to it simultaneously.
a.Please pair the first phone following above "Pairing with 1 phone"
steps.
b.Turn offthe first connected phone's Bluetooth function temporarily.
c.Pair the second set and after pairing is done, turn off the headset.
Then power on the first paired phone's Bluetooth function and restart the
headset. The headset will connect to both phones automatically.
NOTE:
12
english
Publicidad
