Publicidad
Idiomas disponibles
Idiomas disponibles
the mobile device set to automatically answer calls, rejecting a call as
described here will not apply.
Ending a call
a. When the call is over, press the Function button to end the call.
b. You can also wait until your caller hangs up and the call will be discon-
nected automatically.
Voice dialing
a. If your mobile phone supports Voice Dialing, you can use this Function
with your headset.
b. Under the standby or connecting mode, press the Function button on
the Headset and follow the mobile devices' manufacturer's instructions
to proceed with Voice Dialing.
NOTE:
• The activation of Voice Dialing will depend on the design of your mobile
device.
• The working range of the bluetooth headset is approximately 15 feet
indoors and 15 -30 feet outdoors.
Redialing
a. Ifyour mobile device supports a redialing feature, you can also use this
function with your Headset.
b. Under the Standby or Connecting mode, Press MFB twice to redial
the last call.
Mute
a.During the calling,Press and hold decrease Volume key(-) for 2-3 sec-
onds till you hear " DU Du" tone to begin the muto fun function.
b. While this unit is in mute mode,you will hear two long tones "DU Du"
every 4 seconds.
c. To cancel the mute mode, Press the Decrease Key(-) for
2-3 seconds till two short tones "Du Du" sound.
Transferrlng Calls
a. Transfer a call from the headset to a mobile device. While a call is in
progress, press the Increase Volume Key (+) for 2-3 seconds until you
hear one "Du" sound.
b. Transfer a call from the mobile device to the headset. While a call is
in progress, press the Increase Volume Key(+) for2-3 seconds until you
hear one "Du" sound. Note that some phones may require a 2-3 seconds
press of the Function button instead of the lncrease Volume Key ( +) to
perform this function.
14
english
Publicidad
