Maintenance; Care And Maintenance - BABYTREND JG57 Manual De Instrucciones

MAINTENANCE

CARE AND MAINTENANCE

TESTING FOR PROPER WHEEL INSTALLATION
WARNING:
ALWAYS
check the double nut locking
system before each use to
ensure that the front wheel is
securely fastened to the frame.
21) • Lift the front wheel off of the ground and
sharply strike the top of the tire (Fig. 21).
The wheel should not be loose or come off.
If you experience front wheel wobble
that is beyond what is normal for use
while walking or jogging you may have
to adjust the front wheel housing nut.
22) • Remove footrest to access nut. You
can use a standard crescent wrench to
tighten the nut (Fig. 22).
DO NOT OVER TIGHTEN this can
cause damage to the wheel housing.
FENDER
If adjustment or replacement is necessary:
23) • Line up the front fender and press onto
the front frame assembly (Fig. 23a).
• Insert the 4 screws through the
underside of the front frame assembly
into the front fender's plastic tubes.
Tighten the screws only until snug (Fig.
23b). DO NOT OVER TIGHTEN.
13
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
SEAT PAD
OTHER
Fig. 21
Fig. 22
Fig. 23a
Fig. 23b
• To clean the seat pad, use only mild
household soap or detergent and warm
water on a sponge or clean cloth.
• Check your stroller for loose screws,
worn parts, torn material or stitching on
a regular basis. Replace or repair parts
as needed.
Copyright © 2015, Baby Trend Inc., All Rights Reserved. Todos los derechos reservados. Tous droits réservés.
MAINTENANCE
14