Programmable Electronic Lock - SentrySafe SFW123BDC Manual Del Propietário

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

NOTE: Store code and keys in a secure location (other than in the safe).
NOTE: SentrySafe offers a secure online location for the entry and retrieval of your code.
Go to www.sentrysafe.com and register your safe.
Opening your safe for the first time
1
2
A
3
M100TEST
SN100TEST01*
12345
Unlocking your safe with a code
1
2

Programmable Electronic Lock

Ensure any shipping screws have been removed.
Located on the inside of the door.
Remove and discard the screw (if equipped) at the base of
A
B
the lock case.
Turn the lock case to the right (clockwise), from 12 o'clock
B
to 2 o'clock, and remove.
Insert 4 new AA batteries (not included) to power this lock
C
NOTE: Do not use rechargeable batteries or any other type of
non-alkaline batteries. Do not mix old and new batteries.
Do not mix alkaline and other battery types.
Find your factory code on the back of this owner's manual.
Warning: Test your combination several times
before putting valuables inside.
Turn the key to the right so that the lock cylinder pops out.
This is a secondary locking feature not an override key.
Without the key you will not be able to open your safe.
NOTE: Make sure the handle is in the horizontal position
before entering your code or unlocking with your fingerprint.
Enter the 5 digit factory code on the back of the
A
owner's manual.
A green light will indicate the code is correct. You will
B
have 4 seconds to turn the handle to unlock your safe.
4
L
P

Publicidad

Tabla de contenido
loading

Productos relacionados para SentrySafe SFW123BDC

Tabla de contenido