Height Measurement Instructions - Health O Meter 500KL-BL Instrucciones Para El Usuario

HEIGHT MEASUREMENT INSTRUCTIONS

CAUTION: Use caution when sliding height rod up and down. The rod should move
smoothly; do not move the rod in a jerking motion. Fold headpiece down when not in
use.
Note: Patients must be a minimum of 23-5/8" (60 cm) tall for the height to be accurately
measured.
1. With the headpiece in the folded down
position, slide the headpiece up or down to
the estimated height of the patient. Then
raise the headpiece into its horizontal
position. Note: For patients under 48.5" /
123 cm, slide the headpiece down the pillar.
2. Position the patient facing the display head.
Ensure that the patient's posture is upright,
and that the patient's head is straight and
level. Slide the headpiece down until it rests
on the patient's head.
3. Determine the patient's height by reading
the value on the measuring strip nearest to
the line on the red indicator, as shown
below. For heights greater than 48.5" /
123 cm, the height measurement is read at
the red line on the pillar. For heights less
than 48.5" / 123 cm, the height
measurement is read at the red line on the
headpiece.
For heights greater than 48.5" / 123 cm
P/N UM500KL 500KG_BT REV20190816_Web
For heights less than 48.5" / 123 cm
21