Metra 99-7338 Instrucciones De Instalación página 6

ISO DDIN radio provision
1. Cut and remove the center bar
from the radio housing. (Figure A)
2. Snap the ISO DDIN brackets to the
inside edge of the ISO DDIN trim
plate. (Figure B)
3. Slide the radio into the bracket/
radio housing assembly and secure
to the assembly using the screws
supplied with the radio. (Figure C)
4. Locate the factory wiring harness
and antenna connection in the
dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the radio for proper operation.
5. Reassemble the dash in reverse
order of disassembly.
Kit Assembly
(Figure A)
(Figure B)
99-7338
(Figure C)
6