Dash Disassembly - Metra 99-7338 Instrucciones De Instalación

Table of Contents

Dash Disassembly .......................................................... 2

Kit Preparation ............................................................... 3
Kit Assembly
- DIN radio provision ........................................................ 3
- ISO DIN radio provision.................................................. 4
- ISO DDIN radio provision ............................................... 4
99-7338
1. Unclip and remove the A/C vents.
(Figure A)
2. Remove (4) Phillips screws securing the radio
trim panel assembly. (Figure B)
3. Unclip and remove radio and climate
control panel.
4. Remove (4) Phillips screws securing the
climate control, and (4) Phillips screws
securing the hazard switch assembly to the
radio trim panel.
5. Unclip and remove the hazard button from the
factory switch assembly.
Continue to kit preparation
2
Dash Disassembly
(Figure A)
(Figure B)