Kit Assembly - Metra 99-7338 Instrucciones De Instalación

DIN radio provision with pocket
1. Remove the metal DIN sleeve from
the aftermarket radio.
2. Slide the sleeve into the radio
housing and secure by bending
the metal locking tabs down.
(Figure A)
3. Snap the pocket into the bottom
opening of the radio housing.
(Figure B)
4. Slide the radio back into the sleeve
until it clicks in. (Figure C)
5. Locate the factory wiring harness
and antenna connection in the
dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Re-connect the
negative battery terminal and test
the radio for proper operation.
6. Reassemble the dash in reverse
order of disassembly.

Kit Assembly

(Figure A)
(Figure B)
99-7338
(Figure C)
4