Alliance Laundry Systems HC18SN2 Operación Y Mantenimiento página 20

Maintenance
1 Bearing Grease Fitting
2 Seal Grease Fitting
2. For 80 pound capacity models only, lubricate
bearings and seals each month OR after every
200 hours of operation. Refer to Figure 12.
a. Use a premium-grade lithium-based #2
grease. Never mix two types of grease, such
as petroleum and silicone.
18 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
1
2
Figure 12
b. Pump the grease gun slowly, permitting only
the following number of strokes:
Bearing grease fitting, two strokes
G
Seal grease fitting, one stroke
G
Do not pump the grease gun until grease
comes out of the bearing housing. This can
result in overlubrication, causing damage to
bearings and seals.
H047I
H047I
F232137