Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Machine Foundation
Thoroughness of detail must be stressed with all
foundation work to ensure a stable unit installation,
eliminating possibilities of excessive vibration during
extract.
CAUTION
Ensure that the machine is installed on a
level floor of sufficient strength and that
the recommended clearances for
inspection and maintenance are provided.
Never allow the inspection and
maintenance space to be blocked.
Static floor load
Static pressure
Dynamic floor load
Maximum dynamic load
Dynamic pressure
F232102
SW020
Cabinet Freestanding
Floor Load Data
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
The washer-extractor must be placed on a smooth level
surface so that the entire base of the machine is
supported and rests on the mounting surface. (Do not
support the washer-extractor on only four points.)
NOTE: Do not mount the 250 pound capacity
washer-extractor on wooden floors, above ground
level, or over basements. Installation must be "slab
on grade" or equivalent.
The standard 135 pound capacity washer-extractors do
not require anchoring unless mandated by state or
local codes.
Static and dynamic loads on the floor or foundation are
shown in Table 2. Table 2 can be used as a reference
when designing floors and foundations.
135
Standard
Standard
4916 lbs.
9354 lbs.
(21.8 kN)
(41.5 kN)
2
187 lbs/ft
245 lbs/ft
2
(8.9 kN/m
)
(11.7 kN/m
460 lbs.
925 lbs.
(2.05 kN)
(4.12 kN)
460 lbs.
925 lbs.
(2.05 kN)
(4.12 kN)
2
17.8 lbs/ft
24.2 lbs/ft
2
(0.85 kN/m
)
(1.16 kN/m
Table 2
Installation
250
Forward Tilt
Two-Way Tilt
Option
Option
10,154 lbs.
11,154 lbs.
(45.1 kN)
(49.5 kN)
2
2
217 lbs/ft
232 lbs/ft
2
2
)
(10.4 kN/m
)
(11.1 kN/m
925 lbs.
925 lbs.
(4.12 kN)
(4.12 kN)
925 lbs.
925 lbs.
(4.12 kN)
(4.12 kN)
2
2
24.2 lbs/ft
24.2 lbs/ft
2
2
)
(1.16 kN/m
)
(1.16 kN/m
2
2
)
2
2
)
21
Publicidad
Capítulos
Tabla de contenido
