Rice Lake Intruder WM10 Guía Del Operador página 6

Hold Function
available Weighmaster Models
HOLD
The Weighmaster is available in three separate models with different weight capacities
1. Press , when weight stabilizes display will lock and arrow will be steady.
to fit your specific needs.
HOLD
2. Press
to release locked weight.
Model Capacity x graduations
Adjusting Auto-Off
WM10 10 x 0.01kg/22 x 0.02lb / 22lb x
POWER ZERO o
1. Press to power on.
WM25 25 x 0.02kg/55 x 0.05lb / 55lb x
2. Press and hold WM45 45 x 0.05kg/99 x 0.1lb / 55lb x 1 oz
HOLD
3. Press to select auto-off time (OFF, 120, 180, 240, 300 seconds).
UNITS
4. Press to return normal weighing mode.
Units
Calibration
Calibrate using the following process:
1. Press and hold
UNITS
2. Press three times, ZERO COUNT displays.
Units
POWER ZERO o
3. Press , zero displays.
UNITS
4. Press to select calibration unit.
Units
5. Load appropriate amount of weight on scale (See Table 3). Display shows span count.
POWER ZERO o
6. Press , CAL displays, then the weight.
7. Remove the weight, re-power the
Model
WM10
WM25
WM45
Certifications and Approvals
Marked
This device complies with Part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(1) this device may not cause harmful interference, and
(2) this device must accept any interference that may
(2) this device must accept any interference that may
cause undesired operation.
cause undesired operation.
intruder, 230 W. Coleman St., Rice Lake, WI 54868 USA
800-553-5129 • www.intruderinc.com
UNITS
. When
Units
POWER ZERO o
.
10kg
20kg
20kg
Table 3. Calibration Weights
1
/ oz
4
1
/ oz
2
displays, release.
scale and calibratio
kg
n is complete.
20lb
40lb
40lb
lb