Polarizing Set (Optional) - Optika Italy B-510 Serie Manual De Instrucciones

7.8

Polarizing set (optional)

1. Place the polarizer on the light exit ① at the base
of the microscope. (Fig. 26)
2. Loosen the head fixing knob ② and remove the
head from the microscope frame. (Fig. 27)
3. Insert the analyzer into the hole inside the frame
③. (Fig. 28)
4. Put back the head into its original position and
lock the fixing knob.
• The use of the polarization set, although
possible for models B-510FL, B-510LD1
and B-510LD2, is not recommended. The
presence of the analyzer within the optical
path, during the use of fluorescence, causes
a significant reduction in the amount of light
projected on the sample, resulting in difficulty
of observation.
③
Page 26
①
Fig. 26
②
Fig. 27
Fig. 28