Settings And Service; Settings; Customised Settings - Bosch WBE 4420 Instrucciones De Reparacion

3.

Settings and Service

Diagnostic menu recalling (only for after-sales assistance
service, see chap. 6.5)
Recalling of standard calibration menu (see chap. 6.3)
and factory calibration (only for after-sales assistance
service, see chap. 6.4)
Pres <OK> to go back to previous
page.
Settings (only for after-sales assistance service, see
chap. 6.1)
Customised settings (see chap. 6.2)
i
The following symbols are used in the selection
menus:
Automatic acquisition (e.g. time)
Manual acquisition (e.g. using pedal)
The function is deactivated
Robert Bosch GmbH
Settings and Service | WBE 4420 | 27
3.1

Settings

Activates or deactivates the brake to block the flange
and the wheel.
Activates or deactivates the calliper gauge and the
measurement arm.
Pres <OK> to go back to previous
page.
.
Selection for the acquisition of the position through time
or pedal.
Positioning of the adhesive weight:
+ with Easyfix, manual application deactiva-
ted Application always in 12 o'clock po-
sition, the laser is disconnected
+ with the manual calliper gauge or without auxiliary in-
struments:
Application in positions of 12 o'clock, 3 o'clock or 6
o'clock, upon reaching of the position the laser beam
is inserted facilitating the application of the weight.
3.2

Customised settings

Activates or deactivates
the screensaver.
Activates or deactivates the
sound confirmation signal.
Language selection.
Activates or deactivates the automatic start
(measurement start at closing of the wheel protection
cap)
Pres <OK> to go back to previous
page.
Selection for indication of weight in
grams (g) or ounces (oz)
Selection of resolution for the weight
1 g / 0.05 oz or 5 g / 0.25 oz
Suppression of the residue value:
Entering of the weight value below which
the value "0" must be displayed.
Recalling of "Define occupation of the quick recalling
keys" menu.
en
|
1 695 655 424 2010-04-30