Volkswagen 1K0 054 690 B Manual De Montaje página 9

Assembly instructions
Automatic cruise control system (ACC),
Golf 2009 ➤, Golf plus 2009 ➤, Tiguan and Scirocco
Set contents:
◆
1 x Indicator switch
Special tools, test and measuring equipment, and ancillaries required:
◆
Vehicle diagnostics, measurement and information system -VAS 505X- with the Volkswagen brand CD from
V.14.92.00 as well as the basic CD version 14.00 or higher.
1 Procedure:
Note
◆
The automatic cruise control system (ACC) is only suitable for retrofitting in vehicles with MFD (multi-function
display).
◆
Fitting of the automatic cruise control (ACC) system should be carried out by a competent workshop. Incorrect
fitting may lead to damage to the vehicle or to the automatic cruise control (ACC) system.
◆
After completing the fitting work, the car must finally be coded for operation with the automatic cruise control
system using a car diagnostics, measuring and information system.
◆
The work to be performed described in these fitting instructions may change due to model servicing schedules.
For example, changes to the wiring colours or even the fitting sites should not be discounted. For this reason,
always consult the relevant up-to-date wiring diagram or the current vehicle repair manual.
◆
Secure the wires so that they cannot come into contact with any rotating or other moving parts and so that they
cannot chafe on any sharp metal or plastic edges.
◆
All rights to make technical changes reserved.
1.1 Fitting the components
−
cut the battery.

Electrical system; Repair Group 27; starter motor, power supply, ACC
−
Remove the steering wheel complete with airbag unit.

Electrical system; Repair Group 48; overview of steering column fitting
−
Remove the steering column trim.

Interior bodywork fitting; Repair Group 68; interior fittings; shelves, covers and trim panels
−
Remove the existing indicator switch and replace with the supplied indicator switch.

Electrical system; Repair Group 94; exterior lights, lamps and switches
−
Fit the steering column trim and the steering wheel, following the instructions in reverse order.

Electrical system; Repair Group 48; overview of steering column fitting

Interior bodywork fitting; Repair Group 68; interior fittings; shelves, covers and trim panels
−
Connect the battery.

Electrical system; Repair Group 27; starter motor, power supply, ACC.
Note
◆
After disconnecting the battery, ensure that the vehicle accessories (radio, clock, electrical window lift) are
checked in accordance with the workshop manual and / or the instruction manual.
◆
After fitting is completed, the ESP light may illuminate. In this case, basic setting of the steering angle sensor -G85-
must be carried out.
1.2 Concluding work and activation of the cruise control
Page 2 - figure 1
−
Connect a vehicle diagnostics, measurement and information system -VAS 505X- to the vehicle.

Electrical system, repair group 97; wiring, vehicle diagnostics, measurement and information systems; connecting
a vehicle diagnostics, measurement and information system -VAS 505X-.
−
Select the operating mode "Guided trouble shooting" and then the respective vehicle within the vehicle
diagnostics, measurement and information system -VAS 505X-.
◆
1 x Installation instructions
1K0 054 690 B
9