Descargar Imprimir esta página
Volkswagen 1K0 054 630 B Instrucciones De Montaje
Ocultar thumbs Ver también para 1K0 054 630 B:

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 15

Enlaces rápidos

Montageanleitung
Original Park-Distanz-Kontrolle,
Golf 2009 ➤, Golf GTI 2009 ➤ und Scirocco 2008 ➤
Strana 10
CZ
Pagina 30
I
Lieferumfang:
1 x Steuergerät
1 x Summer
4 x Sensor
4 x Abdeckring
1 x Befestigungsmaterial
Benötigte Spezialwerkzeuge, Prüf- und Messgeräte sowie Hilfsmittel:
Innen-Torx (Satz)
Schlitzschraubendreher
Seitenschneider
Handbohrmaschine
Spiralbohrersatz
Forstner-Bohrer
20 mm
Arbeitsablauf:
Hinweis
Der Einbau der Original Park-Distanz-Kontrolle sollte von einer Fachwerkstatt durchgeführt werden. Un-
sachgemäßer Einbau kann zu Schäden am Fahrzeug oder der Park-Distanz-Kontrolle führen.
Die Original Park-Distanz-Kontrolle ist nicht für den Einbau in nachträglich tiefergelegte Fahrzeuge ge-
eignet (Sportfahrwerk etc.).
Die in dieser Montageanleitung beschriebenen auszuführenden Arbeiten am Fahrzeug können sich
durch Modellpflegemaßnahmen unter Umständen ändern. Somit sind zum Beispiel Änderungen der
Leitungsfarben oder auch der Einbauorte nicht auszuschließen. Beachten Sie deshalb immer auch den
jeweils aktuellen Stromlaufplan bzw. die aktuellen Reparaturleitfäden des Fahrzeuges.
Technische Änderungen vorbehalten.
1.1
Sensoren lackieren
Hinweis
Reinigen Sie die Sensoren vor dem Lackieren nicht mit Silikon-
entferner, verwenden Sie einen milden Alkohol wie z.B. Spiri-
tus.
Belassen Sie die Sensoren zum Lackieren in der gelieferten
Verpackung, diese ist als Lackiervorrichtung vorgesehen.
Zusätzliche allgemeine Informationen zum Thema Lackieren:
Selbststudienprogramm Nr. 214/215
In der Abbildung sind als Beispiel die Abdeckringe -1- bereits in
der korrekten Position auf die Sensoren -4- aufgesetzt.
Setzen Sie die Abdeckringe -2- auf die Gummimembrane der
Sensoren -3-.
Lackieren Sie die Sensoren -3- und -4- gleichmäßig und nicht zu
dick in Wagenfarbe.
Entfernen Sie die Abdeckringe -1- und -2- direkt nach dem La-
ckieren (bei noch feuchtem Lack) vorsichtig mit einer Pinzette
und lassen Sie den Lack trocknen.
All manuals and user guides at all-guides.com
Página 15
E
Pagina 35
NL
Page 20
F
Sida 40
S
1 x Leitungssatz Versorgung
1 x Leitungssatz Sensoren
1 x Montageanleitung
1 x Bedienungsanleitung
Dreikantfeile
Rundfeile
Mess- und Anreißwerkzeug
Körner
Pinzette
Leitungsstrang-Reparatur-Set -VAS 1978-
1
4
1K0 054 630 B
5K0 054 630
1K8 054 630
Page 25
GB
2
3
VOT-0690
1

Publicidad

loading

Resumen de contenidos para Volkswagen 1K0 054 630 B

  • Página 1 All manuals and user guides at all-guides.com 1K0 054 630 B Montageanleitung 5K0 054 630 Original Park-Distanz-Kontrolle, 1K8 054 630 Golf 2009 ➤, Golf GTI 2009 ➤ und Scirocco 2008 ➤     Strana 10 Página 15 Page 20 Page 25 ...
  • Página 2 All manuals and user guides at all-guides.com Original Park-Distanz-Kontrolle, Golf 2009 ➤, Golf GTI 2009 ➤ und Scirocco 2008 ➤ Hinweis Bei allen Lackiervorgängen müssen zur Abdeckung die Abdeck- ringe -1- und -2- auf die Sensoren -3- und -4- gesetzt werden. −...
  • Página 3 All manuals and user guides at all-guides.com Original Park-Distanz-Kontrolle, Golf 2009 ➤, Golf GTI 2009 ➤ und Scirocco 2008 ➤ Der gelieferte Leitungssatz Sensoren -7- besteht aus vier einzel- nen Sensorleitungen. Diese Sensorleitungen sind von 1 bis 4 durchnummeriert. Beim Verlegen muss die mit 1 gekennzeichne- te Sensorleitung der in Fahrtrichtung linken Montagebohrung -3- zugeordnet werden.
  • Página 4 All manuals and user guides at all-guides.com Original Park-Distanz-Kontrolle, Golf 2009 ➤, Golf GTI 2009 ➤ und Scirocco 2008 ➤ − Bauen Sie die Leitungsdurchführung -4- des Fahrzeugs aus. − Montieren Sie die Stoßfängerabdeckung in umgekehrter Rei- henfolge und ziehen Sie den Leitungsatz Sensoren durch die Karosserieöffnung -Pfeil- in den Innenraum.
  • Página 5 All manuals and user guides at all-guides.com Original Park-Distanz-Kontrolle, Golf 2009 ➤, Golf GTI 2009 ➤ und Scirocco 2008 ➤ − Wickeln Sie circa 50 mm der Leitungsumwicklung des fahrzeu- geigenen Leitungsstranges im Seitenteil hinten links ab. − Trennen Sie die schwarz/blaue Leitung zum rechten Rücklicht des Fahrzeuges durch (schwarze Steckverbindung) und isolie- ren Sie die Leitungsenden ab.
  • Página 6 All manuals and user guides at all-guides.com Original Park-Distanz-Kontrolle, Golf 2009 ➤, Golf GTI 2009 ➤ und Scirocco 2008 ➤ In der Stoßfängerabdeckung befinden sich als Markierung für die Montage der Sensoren vier Quadrate. Die Bohrpunkte sind die Mittelpunkte dieser vorgegebenen Quadrate. −...
  • Página 7 All manuals and user guides at all-guides.com Original Park-Distanz-Kontrolle, Golf 2009 ➤, Golf GTI 2009 ➤ und Scirocco 2008 ➤ − Entfernen Sie den Leitungsdurchführung -1- vom Leitungssatz Sensoren -2-. VOT-1466 − Ziehen Sie die Leitungsdurchführung -2- des Fahrzeugs aus der Karosserieöffnung -Pfeil- heraus.
  • Página 8 All manuals and user guides at all-guides.com Original Park-Distanz-Kontrolle, Golf 2009 ➤, Golf GTI 2009 ➤ und Scirocco 2008 ➤ − Entfetten Sie den Montageort (im Kofferraum rechts) des Sum- mers -1- der Park-Distanz-Kontrolle mit einem geeigneten Rei- niger, z. B. Spiritus. −...
  • Página 9 All manuals and user guides at all-guides.com Original Park-Distanz-Kontrolle, Golf 2009 ➤, Golf GTI 2009 ➤ und Scirocco 2008 ➤ Stellen Sie Fehlfunktionen der Park-Distanz-Kontrolle fest, führen Sie eine Fehlersuche mit anschließendem erneutem Setup durch.  1.5 Fehlersuche Setup Hinweis Ein erneutes Setup kann nach dem Verbinden der durchschnitte- nen blauen Einzelader erfolgen.
  • Página 10: Pracovní Postup

    All manuals and user guides at all-guides.com Návod k instalaci 1K0 054 630 B 5K0 054 630 Originální pomůcka pro parkování, 1K8 054 630 Golf 2009 ➤, Golf GTI 2009 ➤ a Scirocco 2008 ➤ Obsah dodávky: ◆ ◆ 1 x řídicí jednotka 1 x sada napájecích vodičů...
  • Página 11 All manuals and user guides at all-guides.com 1.2 Montáž komponent, Golf 2009 ➤ a Golf GTI 2009 ➤ Strana 2 - obr. 2 − Na ochranu výplně nárazníku přelepte místa pro vývrty dostatečně lepicí páskou. − Vymontujte výplň nárazníku.  Vnější...
  • Página 12 All manuals and user guides at all-guides.com Strana 4 - obr. 2 Upozornění Zástrčky -1- jsou provedeny tak, že je lze zasunout do zásuvky ovládací jednotky -3- pouze v jedné poloze. − Zastrčte konektory senzorů -1- podle jejich číslování do příslušných přípojů „1“ až „4“ řídicí jednotky -3-, až citelně zaskočí.
  • Página 13 All manuals and user guides at all-guides.com Strana 6 - obr. 2 Dodaný svazek vodičů senzorů -7- sestává ze čtyř jednotlivých vodičů senzorů. Vodiče senzorů jsou očíslovány od 1 do 4. Při pokládání musí být vodič senzoru označený 1 přiřazen levému montážnímu otvoru -3- ve směru jízdy. Další vodiče senzorů...
  • Página 14 All manuals and user guides at all-guides.com 1.4 Setup pomůcky pro parkování Strana 8 - obr. 2 − K seřízení pomůcky pro parkování zaparkujte vozidlo zpětným směrem 50 cm od zdi. Upozornění ◆ U vozidel se snímatelným zařízením pro připojení přívěsu musí být zařízení během seřizování přimontováno. ◆...
  • Página 15: Manual De Montaje

    All manuals and user guides at all-guides.com Manual de montaje 1K0 054 630 B 5K0 054 630 Control de distancia de aparcamiento original, 1K8 054 630 Golf 2009 ➤, Golf GTI 2009 ➤ y Scirocco 2008 ➤ Conjunto de suministro: ◆...
  • Página 16 All manuals and user guides at all-guides.com Página 2 - figura 3 En la cubierta del parachoques están ubicados cuatro círculos a modo de marca para el montaje de los sensores. Los puntos de taladrado están dados por los centros de estos círculos. −...
  • Página 17: Montaje De Los Componentes, Scirocco 2008

    All manuals and user guides at all-guides.com − Conecte el conector -4- del zumbador al respectivo borne „BUZ“ situado en la unidad de mando -3-, hasta que encaje audiblemente. − Vuelva a montar el soporte para la unidad de mando (véase página 3, figura 3, -2-) en sentido contrario. Página 4 - figura 3 −...
  • Página 18 All manuals and user guides at all-guides.com − Coloque cada una de las líneas para los sensores en el lado interior de la cubierta del parachoques en los taladrados de montaje del -3- al -6-. Tire de las cubiertas (véase Página 6, figura 3, -4-) hacia fuera por los taladrados de montaje. −...
  • Página 19 All manuals and user guides at all-guides.com 1.4 Configuración del control de distancia de aparcamiento Página 8 - figura 2 − Para realizar la configuración, posicione el vehículo con la parte trasera a una distancia de 50 cm de una pared. Nota ◆...
  • Página 20 All manuals and user guides at all-guides.com Instructions de montage 1K0 054 630 B 5K0 054 630 Dispositif d'aide au stationnement d'origine, 1K8 054 630 Golf 2009 ➤, Golf GTI 2009 ➤ et Scirocco 2008 ➤ Contenu de la livraison : ◆...
  • Página 21 All manuals and user guides at all-guides.com Page 2 - figure 3 Le cache du pare-chocs porte quatre cercles comme marque pour le montage des capteurs. Les points de perçage correspondent au centre tracé de ces cercles. − Tracer sur la face intérieure du cache du pare-chocs les points de perçage et marquer ceux-ci au pointeau. Amorcer les trous avec un foret de ∅...
  • Página 22 All manuals and user guides at all-guides.com − Introduire la fiche de raccordement -4- du vibreur dans la douille correspondante « BUZ » du calculateur -3- jusqu’à ce qu’elle s’encastre en émettant un déclic perceptible. − Monter le support de calculateur (cf. page 3, fig. 3, -2-) en procédant dans l’ordre inverse. Page 4 - figure 3 −...
  • Página 23 All manuals and user guides at all-guides.com − Poser les câbles à capteurs à l’intérieur du cache du pare-chocs jusqu’aux orifices de montage -3- à -6-. Tirer les caches (cf. page 6, fig. 3, -4-) à travers les orifices de montage vers l’extérieur. −...
  • Página 24 All manuals and user guides at all-guides.com 1.4 Configuration du dispositif d'aide au stationnement Page 8 - figure 2 − Pour procéder à la configuration, placer le véhicule en marche arrière à 50 cm d'un mur. Nota ◆ Si le véhicule est équipé d'un dispositif d'attelage amovible, celui-ci doit être monté au moment de la configuration. ◆...
  • Página 25 All manuals and user guides at all-guides.com Installation instructions 1K0 054 630 B 5K0 054 630 Original parking distance control system, 1K8 054 630 Golf 2009 ➤, Golf GTI 2009 ➤ and Scirocco 2008 ➤ Set contents: ◆ ◆ 1 x controller 1 x power harness ◆...
  • Página 26 All manuals and user guides at all-guides.com 1.2 Component fitting, Golf 2009 ➤ and Golf GTI 2009 ➤ Page 2 - figure 2 − Apply masking tape liberally in the areas where the holes are to be drilled in order to protect the bumper covering. −...
  • Página 27 All manuals and user guides at all-guides.com − Push the power harness connector -2- into the associated socket on the control unit -3-, until it perceptibly engages. − Plug the buzzer connector -4- into the associated “BUZ” socket on the controller -3-, until it “clicks” into the fixed position.
  • Página 28 All manuals and user guides at all-guides.com Page 6 - figure 3 Note ◆ The following steps can only be completed after the paint on the sensors is completely dry. ◆ For reasons of clarity, the figure shows a dismantled sensor. ◆...
  • Página 29 All manuals and user guides at all-guides.com 1.4 Setting up the parking distance control Page 8 - figure 2 − To set up the parking distance control system reverse the vehicle until it is 50 cm from a wall. Note ◆...
  • Página 30: Istruzioni Di Montaggio

    All manuals and user guides at all-guides.com Istruzioni di montaggio 1K0 054 630 B 5K0 054 630 Sistema originale di controllo della distanza di parcheggio, 1K8 054 630 Golf 2009 ➤, Golf GTI 2009 ➤ e Scirocco 2008 ➤ In dotazione: ◆...
  • Página 31 All manuals and user guides at all-guides.com Pagina 2 - Figura 3 Nella copertura del paraurti sono presenti quattro croci che servono da marcature per il montaggio dei sensori. I punti di foratura sono i centri delle croci predefinite. − Sul lato interno della copertura del paraurti, tracciare i punti di foratura e punzonarli.
  • Página 32 All manuals and user guides at all-guides.com − Montare il supporto della centralina (cfr. pagina 3, figura 3, -2-) nella sequenza inversa. Pagina 4 - Figura 3 − Far passare il conduttore singolo rosso partendo dalla centralina, lungo la lamiera di chiusura posteriore fino al lato sinistro del veicolo.
  • Página 33 All manuals and user guides at all-guides.com Pagina 6 - Figura 3 Nota ◆ Le seguenti fasi di lavoro possono essere eseguite solo dopo che lo strato di vernice sui sensori è completamente asciutto. ◆ La figura mostra, per comodità di descrizione, un sensore smontato. ◆...
  • Página 34 All manuals and user guides at all-guides.com 1.4 Setup del sistema di controllo della distanza di parcheggio Pagina 8 - Figura 2 − Per l’esecuzione del setup posizionare il veicolo con la parte posteriore ad una distanza di 50 cm da una parete. Nota ◆...
  • Página 35 All manuals and user guides at all-guides.com Montagehandleiding 1K0 054 630 B 5K0 054 630 Originele parkeerhulp, 1K8 054 630 Golf 2009 ➤, Golf GTI 2009 ➤ en Scirocco 2008 ➤ Inhoud van de verpakking: ◆ ◆ 1 x besturingstoestel 1 x leidingset voeding ◆...
  • Página 36 All manuals and user guides at all-guides.com Blz. 2 - afb. 3 In de bumperafdekking bevinden zich vier cirkels als markeringen voor de montage van de sensoren. De boorpunten zijn de middelpunten van deze opgegeven cirkels. − Teken aan de binnenkant van de bumperafdekking de boorpunten af en markeer de boorpunten. Boor met een ∅...
  • Página 37 All manuals and user guides at all-guides.com − Steek de aansluitstekker -4- van de zoemer in de bijbehorende bus „BUZ“ aan het besturingstoestel -3- tot hij voelbaar vastklikt. − Monteer de regelapparaathouder (vgl. blz. 3; afb. 3, -2-) in de omgekeerde volgorde. Blz.
  • Página 38 All manuals and user guides at all-guides.com − Installeer de afzonderlijke sensorleidingen aan de binnenkant van de bumperafdekking naar de montageboringen -3- tot -6-. Trek de afdekkingen (vergelijk blz. 6, afb. 3, -4-) door de montageboringen naar buiten. − Bevestig de leidingset sensoren -7- met twee sokkel kabelbinders -2- aan de stootzijde van de bumperafdekking. −...
  • Página 39 All manuals and user guides at all-guides.com 1.4 Setup van de parkeerhulp Blz. 8 - afb. 2 − Plaats het voertuig voor de setup achteruit op een afstand van 50 cm voor een muur. ◆ Bij voertuigen met afneembare aanhangwagenkoppeling moet die tijdens de setup gemonteerd zijn. ◆...
  • Página 40 All manuals and user guides at all-guides.com Monteringsanvisning 1K0 054 630 B 5K0 054 630 Original parkeringshjälp, 1K8 054 630 Golf 2009 ➤, Golf GTI 2009 ➤ och Scirocco 2008 ➤ Leveransomfång: ◆ ◆ 1 x styrdon 1 x kabelsats försörjning ◆...
  • Página 41 All manuals and user guides at all-guides.com 1.2 Montering av komponenterna, Golf 2009 ➤ och Golf GTI 2009 ➤ Sidan 2 - bild 2 − För att skydda stötfångarkåpan klistrar man över de områden som skall borras generöst med tejp. −...
  • Página 42 All manuals and user guides at all-guides.com − Stick in anslutningsstickförbindningen -2- till kabelsatsen försörjning i den tillhörande kontakten på styrdonet -3- tills man känner att den går in i rätt läge. − Stick in summerns anslutningskontakt -4- i tillhörande kontakten „BUZ“ på styrdonet -3- tills den hakar in märkbart. −...
  • Página 43 All manuals and user guides at all-guides.com Sidan 6 - bild 3 Observera ◆ De följande arbetsmomenten får följa först sedan lackskiktet på sensorerna har torkat fullständigt. ◆ Bilden visar, för att det skall bli överskådligare, en urmonterad sensor. ◆ Stickförbindningen -3- är så...
  • Página 44 © 2008 Volkswagen Zubehör GmbH Nachdruck, Vervielfältigung oder Übersetzung, auch auszugsweise, ist ohne schriftliche Genemigung der Volkswagen Zubehör GmbH nicht gestattet. Alle Rechte nach dem Gesetz über das Urheberrecht bleiben der Volkswagen Zubehör GmbH ausdrücklich vorbehalten. Änderungen vorbehalten. Hergestellt in Deutschland Original Park-Distanz-Kontrolle, Stand 05.2009...

Este manual también es adecuado para:

5k0 054 6301k8 054 630