Descargar Imprimir esta página

Volkswagen 3AA 054 690 Manual De Montaje página 17

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 9
1.2 Concluding work and activation of the cruise control
Fit all vehicle parts in reverse order.
Note
The lower steering column cover is to be replaced by a cover for vehicles with a cruise control system (CCS). This
is not included in the set contents and must be ordered separately.
After disconnecting the battery, ensure that the vehicle accessories (radio, clock, electric window lift) are checked
in accordance with the vehicle workshop manual and / or the instruction manual.
Page 5 - Fig. 1
Connect the vehicle diagnosis, measurement and information systems to the vehicle diagnosis socket.
Note
If the ESP lamp lights up and if the fault memory contains a steering angle sensor fault with the comment "no or
incorrect basic setting", the steering angle sensor -G85- must undergo a new teach-in procedure. Where necessary,
re-calibrate the steering angle sensor using the "assisted troubleshooting system".
Page 5 - Fig. 2
Select the operating mode "Guided Functions" and then the respective vehicle within the vehicle diagnostics,
measurement and information system -VAS 505X-.
After querying the control units, select the „Functions/component selection" via the button "Jump" and then
sequentially the following menu options:
Software version management
Adjusting the software
Button 3 "Perform upgrading and retrofitting solutions"
Enter the 5 character action code "XXXXX" .
The online connection is created after entering the code and the control unit coding has been carried out.
Quit the "Guided trouble shooting" using "Jump" .
All error memory entries are deleted.
Only applies for vehicles with a "locking" main beam lever:
Encode the steering column switch from "locking" to "switching".
Continue for all vehicles:
Disconnect the vehicle diagnosis, measurement and information system -VAS 505X-
Note
Dependent on the version of the combination instrument, activation of CCS will be indicated by illumination of the
CCS light or by the switch position of the blinker switch.
Take the vehicle for a test drive and check that automatic cruise control (CCS) switches off when the clutch or brake
pedal are used.
17

Publicidad

loading

Este manual también es adecuado para:

5k0 054 6905k0 054 691