osann FLUX ISOFIX Manual Del Usuario página 24

Ocultar thumbs Ver también para FLUX ISOFIX:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 62
EN
Fitti ng the car seat for 15-36 kg (Group II & III, approx. 3 years to 12 years)
Step 1: Place the child seat on the vehicle's seat ensuring that it is fi rmly pressed against the car
seat's backrest.
Step 2: Place your child into the child seat.
Step 3: Fastening the seat belt, making sure that a) the lap secti on of the seat belt webbing goes
above the crotch of the child; b) the diagonal secti ons of the seat belt webbing goes above your
child's shoulder. Making sure the lap secti on of the seat belt webbing goes under the armrest and
then fasten it into the buckle.
Step 4: Make sure that the seat belt is not twisted. Check whether the diagonal secti ons of the seat
belt webbing goes through the groove on the armrest. At the same ti me, the shoulder straps should
be adjusted to the height that is right over your child's neck.
Step 5: Adjust the height of the headrest, make sure that the hook on the headrest is 1 cm over
your child's shoulder.
Step 6: Fasten the seat belt upwards fi rmly, ensure that the seat is fi rmly installed .
Cauti on: Make sure that the seat belt is not twisted. Also check whether the cover is correctly
installed, and whether match wll with the seat belt.

Publicidad

Tabla de contenido
loading

Tabla de contenido