osann FLUX ISOFIX Manual Del Usuario página 27

Step 4: Open the vehicle latch connector
cover, let top tether hook lock the latch
anchorage points and make sure that it is
A
fully ti ghtend. (latch anchorage points are
a litt le diff erent with regard to diff erent
types of car, please read instructi ons of
the car carefully).
B
CAUTION: Make sure that the seat belt is
not twisted.
Step 5: Fasten the belts in its ti ghtest status, and check Step 5: Fasten the belts in its ti ghtest status, and check
whether the latch connector shows green window. In this whether the latch connector shows green window. In this
way, the child seat is fi rmly pressed against the vehicle way, the child seat is fi rmly pressed against the vehicle
seat backrest and do not need to install by the belts. seat backrest and do not need to install by the belts.
If in doubt, consult either the child restraint manufactu- If in doubt, consult either the child restraint manufactu-
rer or the retailer. rer or the retailer.
EN