Chicago Faucets E-Tronic 20 Guia Del Usuario página 5

Start-up Operation
The start-up operation applies to all models.
Prerequisites
• Faucet is mounted
• Water supply is on
• Water supply lines are flushed properly
• For AC faucets, power outlet is installed
1
Fully open supply valves
2
Remove all items from sink
3
Remove protective covering from sensor
4
Wait for 15 seconds for the faucet to calibrate to its
environment
15 sec.
Result
The faucet is now activated.
Chicago Faucets E-Tronic
Test Function
If the faucet does not work as described below, see
"Troubleshooting" section
Hold hand in front of sensor
1
- Water flow starts
Warning
Hot water may burn your skin
Hold hand carefully under water and remove quickly
Remove hand:
2
- Water flow stops
Result
The function is now tested.
5
™ 20 User Guide