Sous Vide Thermal Treatment For High Precision Vacuum; Declaration Of Conformity; Tab Of Electric Technical Data; Sous Vide Parameters - Lotus CSVT-66EM Manual De Instrucciones Para La Instalación Y El Uso

SOUS VIDE THERMAL TREATMENT FOR HIGH PRECISION VACUUM

Congratulations for your choice!
You have just purchased a cutting-edge equipment, a masterpiece of innovation that has been designed according to the
strictest and most demanding criteria of modern catering bearing in mind the expectations of the innovative cuisine of
the new millennium, which has been born thanks to the careful collaboration between engineering of development and
production.
Please read thoroughly and carefully this manual before operating the equipment and follow all instructions contained
therein: for hygiene, use and maintenance.
The manufacturer declares that the appliances are compliant with the prescriptions of the directive EC 2009/142 for the
gas part and with directives 2006
applicable normative particularly concerning room ventilation and exhaust gas emissions.
NOTE: The manufacturer declines any responsibility for direct or indirect damage caused by improper or incorrect
installation, alterations, maintenance or use of the appliance, as in all other cases provided in the articles reported
between our conditions of sale.
DIMENSIO
MODEL NS
cm
CSVT-66EM 60x60x29h
CSVT-76EM 60x70x29h
57x34x38h
TR27
•
Digital display
•
Polycarbonate cover
•
Fully in stainless steel both inside and outside
•
Frontal discharge tap
•
Temperature accuracy 0,1°C (from 0 to 90
•
Volume of 30 litres
•
Containment capacity 27 litres
•
Dimensions of the tank: 500x300x200 mm
Attention: In accordance with international provisions, when connecting the appliance, an automatic upstream device
enabling the disconnection of all contacts from the mains must be provided; this device must have a contacts opening of
at least 3 mm.
The appliance must be connected to an equipotential bonding.
The connection screw is positioned at the back of the appliance and it's identified by the symbol
Attention: The manufacturer will neither be held responsible, nor will give any compensation during the guarantee
period, for any damage caused and which is due to inadequate installations and not compliant with the instructions.
Load the tank with distilled or demineralised water, in the direction of the right hole right on
the tank bottom, by means of the load system provided with this unit; the pipe must result
filled completely, to avoid the pump to work dry and makes it the safety thermostat trigger.
This operation is necessary to avoid damage to components and spare parts which serves to lengthen the life of the
equipment. Also pay attention to limestone present in the network water. The machine is for the use solely of
components of first choice. Frame and tank are fully in stainless steel.
Please keep al safety and hygiene operations required and reported along the present manual.
GB

DECLARATION OF CONFORMITY

for the electric part. The installation must be done observing
/95/EC, 2004/108/EC

TAB OF ELECTRIC TECHNICAL DATA

POWER SUPPLY CONSUMPTION
230Vac 50 Hz
230Vac 50 Hz
230Vac 50 Hz

SOUS VIDE PARAMETERS

o
C)

ELECTRICAL CONNECTION

EQUIPOTENTIAL

DEVICE INSTALLATION

IE
MAXIMUM
POWER [kW]
(A)
10,43
10,43
10,43
24
POWER SUPPLY
CABLE (mm
2,4 3x1,5
2,4 3x1,5
2,4 3x1,5
2
)
.